CAD pricing guidelines

  • CAD 1/2 hour
  • 90
  • {{content-2}}
  • Eternity bands
  • wedding bands
  • simple solitaires & pendants
  • {{content-6}}
  • New Project
  • After 1/2 hour up to 1 hour
  • 150
  • {{content-2}}
  • simple halo rings
  • solitiares with lots of melee
  • solitaires where stone photography is required (cushions,, radiants, emeralds etc.)
  • {{content-6}}
  • New Project
  • 15 min increments after first hour
  • 37.50
  • {{content-2}}
  • The average CAD job is about 1.75 hours.
  • shadow bands 1.5-2 hours
  • 2-5+ hours Complex rings with assemblies, decorative elements 2-3hrs
  • {{content-6}}
  • New Project
  • Change feature from previous order
  • 49
  • {{content-2}}
  • A new project making minor changes on a CAD file from a previous order.
  • No changes – one and done
  • Example: Resize an existing ring (if it’s easy – most are), different stone and setting on the same shank with a new ring size
  • {{content-6}}
  • new project

Ballpark CAD Pricing Guide:

We’re happy to provide Estimates and Guesstimates. However to save time and your place in line, please consider the following “Ballparks.”

The following guidelines are approximate for CAD/CAM projects (does not include casting) with adequate drawings and plans:

Single: $150-$210. Eternity bands, solitaires, wedding bands 2-sided “coin” like pendants

Double: $210-$450. Simple halo rings, large solitaires or ones with lots of detail, split shanks, basket type pendants etc.

Triple: $450-$700 Decorative halo rings, multi part assemblies (2 tone) pieces with lots of artwork and sculptural elemets, large pendants, simple bracelets, simple award rings, Pieces with non-symmetrical geometry, oddball stones, large pieces

Home Run! $700+ For the adventure of projects that have little or no guidelines/plans with lots of design development and changes, or just plain complicated and involved projects. We haven’t gone much more than $1500 here.